AssetAdministrationShell Registry - Authorization#
This feature enables authorized access to the AssetAdministrationShell Registry.
To enable this feature, the following properties should be configured:
basyx.feature.authorization.enabled = true
basyx.feature.authorization.type = <The type of authorization to enable>
basyx.feature.authorization.jwtBearerTokenProvider = <The Jwt token provider>
basyx.feature.authorization.rbac.file = <Class path of the Rbac rules file if authorization type is rbac>
spring.security.oauth2.resourceserver.jwt.issuer-uri= <URI of the resource server>
Note: Only Role Based Access Control (RBAC) is supported as authorization type as of now, also Keycloak is the only Jwt token provider supported now, and it is also a default provider.
To know more about the RBAC, please refer Authorization Services Guide To know more about the Keycloak server administration, please refer Server Administration Guide
An example valid configuration:
basyx.feature.authorization.enabled = true
basyx.feature.authorization.type = rbac
basyx.feature.authorization.jwtBearerTokenProvider = keycloak
basyx.feature.authorization.rbac.file = classpath:rbac_rules.json
spring.security.oauth2.resourceserver.jwt.issuer-uri= http://localhost:9096/realms/BaSyx
RBAC rule configuration#
This section outlines how RBAC rules are defined, stored, and managed, and provides detailed explanations of the backend persistency options available.
What is a Rule in RBAC?#
A rule in the context of RBAC is a policy that defines the actions a specific role can perform on certain resources. Each rule typically consists of the following components:
Role: The entity (user or group) that the rule applies to, such as
adminorbasyx-reader.Action: The operation permitted by the role, such as
CREATE,READ,UPDATE, orDELETE.Target Information: The resource(s) that the action can be performed on, like
aas(Asset Administration Shell) IDs. The targetInformation defines coarse-grained control over the resource, you may define the aasIds with a wildcard (*), it means the defined role x with action y can access any Asset Administration Shell on the repository. You can also define a specific AAS Identifier in place of the wildcard (*), then the role x with action y could be performed only on that particular AAS. There could be a single aasId or multiple aasIds as a list.
Example of a Simple RBAC Rule#
{
"role": "admin",
"action": "READ",
"targetInformation": {
"@type": "aas-registry",
"aasIds": "*"
}
}
In this example, the rule grants the admin role permission to perform the READ action on all resources of type aas.
Persistency Support for RBAC Rules#
The AAS Registry supports two backend persistency mechanisms for storing RBAC rules:
InMemory RBAC Storage#
InMemory RBAC stores all rules directly in the application’s memory.
The rules must be configured during the application startup, and they remain in memory for the duration of the application’s runtime.
Rules are defined using a JSON format as defined below.
[
{
"role": "basyx-reader",
"action": "READ",
"targetInformation": {
"@type": "aas-registry",
"aasIds": "*"
}
},
{
"role": "admin",
"action": ["CREATE", "READ", "UPDATE", "DELETE"],
"targetInformation": {
"@type": "aas-registry",
"aasIds": "*"
}
},
{
"role": "basyx-deleter",
"action": "DELETE",
"targetInformation": {
"@type": "aas-registry",
"aasIds": ["testAasId1", "specificAasId", "testAasId2"]
}
}
]
[!Note]
The Action are fixed as of now and limited to (CREATE, READ, UPDATE, DELETE, and EXECUTE).
Rules cannot be modified after the application has started.
This is suitable for simple, small-scale infrastructure or testing environment where the rule set remains static.
How to enable this storage?#
The InMemory rule storage is used by default, but to explicitly configure, below propertiy needs to be configured inorder to enable the InMemory Storage:
basyx.feature.authorization.rules.backend=InMemory
Submodel-based RBAC Storage#
RBAC rules are stored in a dedicated Security Submodel within a Configuration-Submodel Repository.
The Configuration-Submodel Repository is a general-purpose repository that supports various configuration models, with RBAC rules being part of its Security Submodel.
This repository is equipped with Authorization to ensure that only designated entities (like administrators or maintainers) can manage the rules inside the Security Submodel.
Similar to InMemory RBAC storage, initial rules can be defined in JSON format. However, upon application startup, these rules are automatically adapted and stored in the Security Submodel.
This allows for a more flexible and persistent management of rules, which can be updated or extended.
Example Configuration Process:#
Define initial rules in JSON format. (Not mandatory)
On application startup, these rules are validated and stored in the Security Submodel.
The below JSON RBAC rule is automatically adapted to Submodel-based RBAC rule:
{
"role": "admin",
"action": "DELETE",
"targetInformation": {
"@type": "aas-registry",
"aasIds": "*"
}
}
The equivalent of above rule in Submodel-based RBAC rule (below in JSON serialized format):
{
"modelType": "SubmodelElementCollection",
"idShort": "YWRtaW5ERUxFVEVvcmcuZWNsaXBzZS5kaWdpdGFsdHdpbi5iYXN5eC5hYXNyZXBvc2l0b3J5LmZlYXR1cmUuYXV0aG9yaXphdGlvbi5BYXNUYXJnZXRJbmZvcm1hdGlvbg==",
"value": [
{
"modelType": "Property",
"value": "admin",
"idShort": "role"
},
{
"modelType": "SubmodelElementList",
"idShort": "action",
"orderRelevant": true,
"value": [
{
"modelType": "Property",
"value": "DELETE"
}
]
},
{
"modelType": "SubmodelElementCollection",
"idShort": "targetInformation",
"value": [
{
"modelType": "SubmodelElementList",
"idShort": "aasIds",
"orderRelevant": true,
"value": [
{
"modelType": "Property",
"value": "*"
}
]
}
]
}
]
}
[!Note]
The API for adding and removing rules is consistent with that of a standard Submodel Repository.
The IdShort of the rule is automatically generated and it will replace the original IdShort configured while adding the rule.
Only addition and removal of rules are supported; updating existing rules is not allowed due to constraints.
Only the responsible entity (typically an administrator or maintainer) should be permitted to manage the rules within the Security Submodel.
This ensures that the RBAC policies are strictly controlled and secure.
How to enable this storage?#
The following properties needs to be configured inorder to enable the Submodel-based Storage:
basyx.feature.authorization.rules.backend=Submodel
basyx.feature.authorization.rules.backend.submodel.authorization.endpoint=<Endpoint of the Security Submodel>
basyx.feature.authorization.rules.backend.submodel.authorization.token-endpoint=<Token Endpoint>
basyx.feature.authorization.rules.backend.submodel.authorization.grant-type = <CLIENT_CREDENTIALS> or <PASSWORD>
basyx.feature.authorization.rules.backend.submodel.authorization.client-id=<client-id>
basyx.feature.authorization.rules.backend.submodel.authorization.client-secret=<client-id>
basyx.feature.authorization.rules.backend.submodel.authorization.username=<username>
basyx.feature.authorization.rules.backend.submodel.authorization.password=<password>
Constraints and Rule Management#
To ensure quick access to rules, a hash key is generated based on the role, single action, and target information type.
Duplicate entries with the same role, action, and target information type are not allowed.
This necessitates the splitting of rules and prevents the update of existing rules (since modifying a rule would alter the hash key, which could impact performance).
Due to the constraint on hash key generation, updates to existing rules are not supported.
If a rule needs to be changed, the existing rule must be removed, and a new rule must be added with the updated information.
Applies to both the storage backend.
Automatic Rule Splitting#
If a rule specifies multiple actions (e.g., [“CREATE”, “READ”]), it will automatically be split into individual rules, each with a single action.
Example of Automatic Splitting:
{
"role": "admin",
"action": ["CREATE", "READ"],
"targetInformation": {
"@type": "aas-registry",
"aasIds": "*"
}
}
Will be split into:
{
"role": "admin",
"action": "CREATE",
"targetInformation": {
"@type": "aas-registry",
"aasIds": "*"
}
},
{
"role": "admin",
"action": "READ",
"targetInformation": {
"@type": "aas-registry",
"aasIds": "*"
}
}
Action table for RBAC#
Below is a reference table that shows which actions are used in what endpoints of the AAS Registry:
Action |
Endpoint |
|---|---|
READ |
GET /shell-descriptors |
CREATE |
POST /shell-descriptors |
UPDATE |
PUT /shell-descriptors/{aasIdentifier} |
DELETE |
DELETE /shell-descriptors/{aasIdentifier} |
EXECUTE |
- |